Tiaano®, a well-equipped in-plant facilitated company experts in producing, chemical & Engineering Equipment’s by using inert metals of… Titanium, Tantalum, Platinum, Zirconium, etc., we manufacture Titanium based products has peculiar properties. 

Titanium Rod is a very popular go-to for many products and Chemical Process application. It is used where corrosion resistance is an important criterion. It lends itself to a multitude of products, from fasteners to jewelry also connecting rods. It provides a lighter weight material and higher strength.

Titanium is a low density material, which means that it is ideally meant for chemical process applications that require lightweight components. One industry that makes use of the Titanium Fasteners is the aerospace industry. Since the vehicle has to gain momentum at a rapid pace, using lighter weighing Aerospace Titanium Fasteners aids it to achieve that. The density of the material is lower than that of stainless steel alloys.

Ø  Advantages of Titanium…

Ø  Low weight

Ø  Good current resistance

Ø  Long operating life

Ø  Maintenance free

Ø  Economical

Ø  High dimensional stability and load resistance

Ø  Extremely low consumption rate

Ø  High chemical stability

Ø  High conductivity

Project Details:-

 Designer, Manufacturer and Supplier: Ti Anode Fabricators Pvt. Ltd, Chennai.

Brand Name: Tiaano

Type: Titanium Rod

Application: Research and Development

Installation at: Anna university Chennai

Inspection by: Customer

Reference Link:-

https://twitter.com/TiaanoStore

https://www.instagram.com/tiaano_store/

https://www.pinterest.it/Ti_store/_saved/

https://www.facebook.com/Tiaano-Store-152560663247045

https://twitter.com/ti_sanitation

contact us: esurveyor@tiaano.com

PH: +91 9444569900, 9176883999

Tiaano®, a well-equipped in-plant facilitated company experts in producing, chemical & Engineering Equipment’s by using inert metals of… Titanium, Tantalum, Platinum, Zirconium, etc.,

Zirconium Sheets is a versatile material used in a variety of industries. Its high melting point makes it an ideal material for high-temperature applications. Because zirconium is a soft, malleable metal, it can be rolled into thin sheets. In addition, Zirconium Sheets are very resistant to corrosion. Although zirconium is susceptible to corrosion in hydrofluoric acid, the sheet itself is protected from the harmful effects of acids by a nanometre-thick layer of passivation.

Another advantage of zirconium sheet over other metals is that it is soft and malleable at room temperature. This makes it easy to work with. Furthermore, zirconium is resistant to corrosion from acids, alkali and seawater. In addition to these advantages, zirconium sheets also have excellent machining properties.

Zirconium is a rare metal with several interesting properties. It is incredibly resistant to corrosion and has a high melting point. This makes zirconium an excellent material for special applications. Its low neutron capture cross-section makes it useful for the nuclear industry.

Project Details:-

Designer, Manufacturer and Supplier: Ti Anode Fabricators Pvt. Ltd, Chennai.

Brand Name: Tiaano

Type: Zirconium Sheet

Application: Research and Development

Installation at: Anna university Chennai

Inspection by: Customer

Reference Link:-

https://twitter.com/TiaanoStore

https://www.instagram.com/tiaano_store/

https://www.pinterest.it/Ti_store/_saved/

https://www.facebook.com/Tiaano-Store-152560663247045

https://twitter.com/ti_sanitation

contact us: esurveyor@tiaano.com

Ph: +91 9444569900, 9176883999

Tiaano®, a well-equipped in-plant facilitated company experts in producing, chemical & Engineering Equipment’s by using inert metals of… Titanium, Tantalum, Platinum, Zirconium, etc., we manufacture Titanium based products has peculiar properties.

Titanium is a low density material, which means that it is ideally meant for chemical process applications that require lightweight components. One industry that makes use of the Titanium Fasteners is the aerospace industry. Since the vehicle has to gain momentum at a rapid pace, using lighter weighing Aerospace Titanium Fasteners aids it to achieve that. The density of the material is lower than that of stainless steel alloys.

Titanium Rod is a very popular go-to for many products and Chemical Process application. It is used where corrosion resistance is an important criterion. It lends itself to a multitude of products, from fasteners to jewelry also connecting rods. It provides a lighter weight material and higher strength.

Advantages of Titanium…..

• Low weight
• Good current resistance
• Long operating life
• Maintenance free
• Economical
• High dimensional stability and load resistance
• Extremely low consumption rate
• High chemical stability
• High conductivity

Project Details:-

Designer, Manufacturer and Supplier: Ti Anode Fabricators Pvt. Ltd, Chennai.

Brand Name: Tiaano

Type: Titanium Sheet & Rod

Application: Research and Development

Installation at: Anra Pharmaceticals Pvt. Ltd. Madurai.

 Inspection by: Customer

Reference Link:-

https://twitter.com/TiaanoStore

https://www.instagram.com/tiaano_store/

https://www.pinterest.it/Ti_store/_saved/

https://www.facebook.com/Tiaano-Store-152560663247045

https://twitter.com/ti_sanitation

Contact us: esurveyor@tiaano.com

Phone: +91 9444569900 / 9176883999

TITANIUM ROD:

Tiaano, a well-equipped in-plant facilitated company experts in Producing, Chemical & Equipments by using inert metals of… Titanium, Tantalum, Platinum, Zirconium, etc. We manufacture Titanium base products. Titanium Rod is an incredibly useful metal that’s used by various industries, including automotive, aerospace and architecture.

Commercially Pure Titanium Rods

Grades 1 to 4 are considered to be Titanium Rod in its purest form. We supply the Titanium Rod in different Grades to accommodate the needs and desires of an array of industries, could you benefit from our stock range?

Grade 1.

When compared to other metallic rods, the Grade 1 Titanium Rod is the softest, most ductile metal that we supply. Having said this, Grade 1 Titanium offers a high level of formability and corrosion resistance, not forgetting impact toughness.

Our Titanium Rods are designed to suit a wide range of applications, including chemical processing, architecture and automotive parts, however, Grade 1 Titanium Rods are also used by the medical industry for surgical implants and equipment.

Grade 2.

Referred to as the commercially pure “workhorse”, Grade 2 Titanium Rods provide useful strength for a vast range of applications. To compare Grade 2 with Grade 1 Titanium, Grade 2 is slightly stronger and offers great weld ability, strength and ductility which ultimately makes it a prime choice of industries.

Grade 2 Titanium rods can be used for similar applications as the Grade 1 ones but is used for power generation, hydro-carbon processing and desalination too.

Grade 4 This Grade of Titanium is Titanium in its strongest form. One of the main reasons why Grade 4 Titanium is so popular is that it provides corrosion resistance and exceptional strength.

Having been discovered by the medical industry, Titanium is used today for medical equipment and implants and this doesn’t just include Titanium Rods! The Titanium Bars and Titanium Sheet come in handy for many different medical applications too.

Alloyed Titanium Rods

Titanium is alloyed with another metal for greater strength. Combining properties of Titanium with other metals will provide a reliable metal that is guaranteed to provide you with the best quality.

 Project Details:-

Designer, Manufacturer and Supplier: Ti Anode Fabricators Pvt. Ltd, Chennai.

Brand Name: Tiaano

Type: Titanium Rod

Application: Research and Development

Installation at: India

Inspection by: Customer

esurveyor@tiaano.com;tiaanostore@tiaano.com;equipmentsmktg@tiaano.com  

 Reference Link:-

https://twitter.com/TiaanoStore

https://www.instagram.com/tiaano_store/

https://www.pinterest.it/Ti_store/_saved/

https://www.facebook.com/Tiaano-Store-152560663247045

Tiaano, a complete design and manufacturing Continuous Type Electro Chlorinators, Batch Type Electro Chlorinators, Titanium Electrolyzers and Titanium Electrode assembly for water treatment application with different cell arrangement. There are Parallel Plate Electrode (PPE), Concentric Tube Electrode (CTE) and Parallel Plate and Mesh Electrodes (PPME).

Batch type Electrochlorinator produces required chlorine in the form of Sodium Hypochlorite in 8 hours from common salt as per your requirement of customer and Standards.  It is safe and cost saving. Compact Electrochlorinator or Batch type disinfectant generator consists, Reaction tank, Hypo Tank, Power supply unit and Dosing pump are all integrated into one single unit. They are prewired and piped, so they can be installed any were without any civil foundation or support stands. We (Tiaano) are suppling Electrolyzers / electrode assembly / Anode and Cathodes also for making Electro chlorination unit for ECU manufacture.

Titanium is mostly used as a cathode during electrolysis process. Titanium has peculiar properties. It is resistant to the passage of current into an electrolyte, but it has low resistivity when a second metal makes contact with it. If an attempt is made to use titanium as an anode in salt water, this resistance to the passage of current into the electrolyte immediately becomes apparent for an increasing anodic current is applied to it, the voltage required to force the current through the surface film rises until at the weakest points the film breaks down and intense local corrosion ensues.

Tiaano, a complete design and manufacturing the Mixed Metal Oxide (MMO) Coated Titanium Anodes and cathodes for the production of Sodium Hypochlorite Generator, On-Site Chlorine Generators, Chlorination Unit and Salt Chlorine

Advantages of MMO (Mixed Metal Oxides) Anodes: MMO anodes having longer life & stable operation, Lightweight and easy to handle, Very minimum maintenance cost, having good electrical conductance and meet a wide range of electrolysis needs. On-site generation is a proven, cost-effective, reliable and safe treatment and bulk sodium hypochlorite disinfection. The Solution destroys all classes of microorganism (Virus / Bacteria / Protozoa).

MMO Coated Titanium Anode for Chlorination System:-

MMO Coated Titanium Anode for Seawater and Salt Water Chlorination System On-Site Chlorine Generator, Chlorination Device, Swimming Pool Salt Chlorine Generator. Electrolytic seawater Sodium Hypochlorite Generator using natural seawater, equipped with high speed and on-site produce Sodium Hypochlorite Solution.

Brine Electrochlorinator using three common consumables: salt, water and electricity.  On-site generation is a proven, cost-effective, reliable and safe treatment and bulk sodium hypochlorite disinfection.

Tiaano, a complete design and manufacturing the Iridium Based MMO Coated Titanium anodes and Iridium Based MMO Coated for Water Ionization and water treatment industrial applications. Iridium Based Titanium Anodes and Mixed Metal Oxide Anodes are found in industrial applications, such as, hypochlorite generation in waste water, in refineries, petrochemical plants and power plants, for potable water supplies and in food processing.

Marine applications include the above as well as use in off shore platforms and the prevention of mussel, barnacle and algal growth on ships hulls. This anodes specially designed for Water Ionizations / Ionizer. Tiaano manufacturing different dimensions and Shapes of MMO electrode for water ionizers. The ionizer uses grade one titanium Anodes and Cathodes to be coated with a good electrical conductor with longevity built to last 10 years that will also not dissolve during electrolysis. Stainless steel was used for Water Ionizer electrodes in the late 1980's and was found not be a suitable material because they did not last more than a few years. The industry began using titanium Anode in the early 1990's because of its design life.

We (Tiaano) produce high quality Titanium mesh. Our Titanium mesh products are available in various types of Mesh opening. We can produce Titanium mesh with titanium Grade 1 and 2 by customer’s requirement.

Titanium Expanded mesh offers very high mechanical strength and outstanding corrosion resistance properties. It is widely used as the structural material in the various industrial applications. Titanium produces protective oxide layer that prevents the base metal from corrosive attack in the diverse application environments.

Titanium expanded metal is a strong, durable and uniform open mesh allowing full supply of light, air, heat, fluids and rays while preventing an entrance of unnecessary objects or individuals.

Titanium Expanded Mesh Applications:-

1.         Electro Plating

2.         Electro Winning

3.         Cathodic Protection (CP)

4.         Electro Chemical Equipment

5.         Anodes and Cathode for Electro Chlorination

6.         Metal Recovery

7.         Ionization

8.         Titanium Equipments

Tiaano offer Expanded Mesh as per ASTM Standard in different Grades, different openings and different sizes. Also Tiaano provides Mixed metal Oxides coating and Platinum plating on Titanium Expanded Mesh as Anodes and cathodes for various industrial application.

Titanium is most likely to play more important role in electro chemical applications. Its excellent properties such as low density, high mechanical strength and good corrosion resistance give it many advantages.

Tiaano is a known manufacturer and exporter of Titanium Gr 1 Sheets and Plates also Titanium anodes and cathodes. Titanium Gr 1 Plates is the most commonly used Titanium worldwide and is the most commonly used alloy in the oilfield, where this alpha-beta alloy is also called as the workhorse alloy of the titanium industry.

Titanium Sheet and Plate Specifications:-

Specifications          : ASTM / ASME SB265

Size: Max. 2000 mm

Thickness: Min.0.5 mm to 20 mm

Titanium is an element (chemical symbol Ti, atomic number 22) with a low density and strong durability. It is a strong, lustrous, corrosion-resistant transition metal with a silver color. The two most useful properties of the metal form are corrosion resistance and the highest strength-to-weight ratio of any metal.

Titanium is 30% stronger than steel, but is nearly 50% lighter. Titanium is 60% heavier than aluminum, but twice as strong. Titanium has excellent strength retention to 1,000 degrees Fahrenheit. Titanium’s high corrosion resistance is also a valuable characteristic; as when exposed to the atmosphere, titanium forms a tight, tenacious oxide film that resists many corrosive materials, particularly salt water.

Here are 5 uses for titanium plates:-

Laptop Computers - laptop manufacturers

Aerospace Industry

Architecture and Art - buildings and sculptures

Armor and protection applications

Titanium has excellent corrosion resistance property, excellent weldability and is used in a wide variety of applications. This grade material is mainly used in marine and chemical industries where the parts are subjected to very harsh environments. Various industries make use of titanium sheet, including: Aerospace, Jet engines, protective assemblies, airframes, and firewalls. Power generation Protective assemblies and firewalls. Automotive cut or stamped engine parts such as wrist pins and springs.

Grade 2 titanium is called the “workhorse” of the commercially pure titanium industry, thanks to its varied usability and wide availability. It shares many of the same qualities as Grade 1 titanium, but it is slightly stronger. Both are equally corrosion resistant. ... Medical industry.

Typical applications for Grade 2 titanium include oil & gas components, reaction and pressure vessels, tubing or piping systems, heat exchangers, liners, flue-gas desulphurization systems and many other industrial components.

Is titanium a good conductor?

The flow of electrons through a metal due to a drop in potential is known as electrical conductivity. Titanium is not a good conductor of electricity. If the conductivity of copper is considered to be 100%, titanium would have a conductivity of 3.1%.

Why is titanium a poor conductor?

Titanium has its outer shell completely filled, but the next one down partially filled. The electrons are somewhat available to share, but are a bit more closely associated with the nucleus. This makes titanium a worse conductor than copper or aluminum.